Guia de Implementação da SES GO - CORE
0.0.1 - draft Brazil flag

Guia de Implementação da SES GO - CORE - Local Development build (v0.0.1) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: Profissional - Detailed Descriptions

Active as of 2025-03-20

Definitions for the profissional resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Practitioner
Definition

A person who is directly or indirectly involved in the provisioning of healthcare.

ShortDados do Profissional de SaúdeA person with a formal responsibility in the provisioning of healthcare or related services
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Practitioner.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Practitioner.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Practitioner.identifier
Definition

An identifier that applies to this person in this role.

ShortAn identifier for the person as this agent
NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..2*
TypeIdentifier
Is Modifierfalse
Summarytrue
Requirements

Often, specific identities are assigned for the agent.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Practitioner.identifier. The slices areOrdered and Closed, and can be differentiated using the following discriminators:
  • pattern @ system
  • 8. Practitioner.identifier.use
    Definition

    The purpose of this identifier.

    Shortusual | official | temp | secondary | old (If known)
    Comments

    Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

    Control0..1
    BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
    (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

    Identifies the purpose for this identifier, if known .

    Typecode
    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Practitioner.identifier.value
    Definition

    The portion of the identifier typically relevant to the user and which is unique within the context of the system.

    ShortThe value that is unique
    Comments

    If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Example<br/><b>General</b>:123456
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Practitioner.identifier:cpf
    Slice Namecpf
    Definition

    An identifier that applies to this person in this role.

    ShortAn identifier for the person as this agent
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..1*
    TypeIdentifier
    Is Modifierfalse
    Summarytrue
    Requirements

    Often, specific identities are assigned for the agent.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. Practitioner.identifier:cpf.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..0*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Practitioner.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 16. Practitioner.identifier:cpf.use
      Definition

      The purpose of this identifier.

      Shortusual | official | temp | secondary | old (If known)
      Comments

      Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

      Control0..01
      BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
      (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

      Identifies the purpose for this identifier, if known .

      Typecode
      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. Practitioner.identifier:cpf.type
      Definition

      A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

      ShortDescription of identifier
      Comments

      This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

      Control0..01
      BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type
      (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

      A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

      TypeCodeableConcept
      Is Modifierfalse
      Summarytrue
      Requirements

      Allows users to make use of identifiers when the identifier system is not known.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Practitioner.identifier:cpf.system
      Definition

      Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

      ShortThe namespace for the identifier value
      Comments

      Identifier.system is always case sensitive.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

      Pattern Valuehttps://fhir.saude.go.gov.br/sid/cpf
      Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Practitioner.identifier:cpf.value
      Definition

      The portion of the identifier typically relevant to the user and which is unique within the context of the system.

      ShortThe value that is unique
      Comments

      If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

      Control10..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Example<br/><b>General</b>:123456
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Practitioner.identifier:cpf.period
      Definition

      Time period during which identifier is/was valid for use.

      ShortTime period when id is/was valid for use
      Control0..01
      TypePeriod
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. Practitioner.identifier:cpf.assigner
      Definition

      Organization that issued/manages the identifier.

      ShortOrganization that issued id (may be just text)
      Comments

      The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

      Control0..01
      TypeReference(Organization)
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. Practitioner.identifier:cns
      Slice Namecns
      Definition

      An identifier that applies to this person in this role.

      ShortAn identifier for the person as this agent
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..1*
      TypeIdentifier
      Is Modifierfalse
      Summarytrue
      Requirements

      Often, specific identities are assigned for the agent.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. Practitioner.identifier:cns.extension
      Definition

      An Extension


      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortExtensionAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..0*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Practitioner.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 32. Practitioner.identifier:cns.use
        Definition

        The purpose of this identifier.

        Shortusual | official | temp | secondary | old (If known)
        Comments

        Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

        Control0..01
        BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
        (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

        Identifies the purpose for this identifier, if known .

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        34. Practitioner.identifier:cns.type
        Definition

        A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

        ShortDescription of identifier
        Comments

        This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

        Control0..01
        BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type
        (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

        A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Requirements

        Allows users to make use of identifiers when the identifier system is not known.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        36. Practitioner.identifier:cns.system
        Definition

        Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

        ShortThe namespace for the identifier value
        Comments

        Identifier.system is always case sensitive.

        Control10..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

        Pattern Valuehttps://fhir.saude.go.gov.br/sid/cns
        Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        38. Practitioner.identifier:cns.value
        Definition

        The portion of the identifier typically relevant to the user and which is unique within the context of the system.

        ShortThe value that is unique
        Comments

        If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

        Control10..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Example<br/><b>General</b>:123456
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. Practitioner.identifier:cns.period
        Definition

        Time period during which identifier is/was valid for use.

        ShortTime period when id is/was valid for use
        Control0..01
        TypePeriod
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. Practitioner.identifier:cns.assigner
        Definition

        Organization that issued/manages the identifier.

        ShortOrganization that issued id (may be just text)
        Comments

        The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

        Control0..01
        TypeReference(Organization)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        44. Practitioner.name
        Definition

        The name(s) associated with the practitioner.

        ShortThe name(s) associated with the practitioner
        Comments

        The selection of the use property should ensure that there is a single usual name specified, and others use the nickname (alias), old, or other values as appropriate.

        In general, select the value to be used in the ResourceReference.display based on this:

        1. There is more than 1 name
        2. Use = usual
        3. Period is current to the date of the usage
        4. Use = official
        5. Other order as decided by internal business rules.
        Control10..*
        TypeHumanName
        Is Modifierfalse
        Summarytrue
        Requirements

        The name(s) that a Practitioner is known by. Where there are multiple, the name that the practitioner is usually known as should be used in the display.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        RN04: O text deve possuir pelo menos dois nomes separados por espaço. (text.split(' ').count() > 1)
        46. Practitioner.name.extension
        Definition

        An Extension


        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortExtensionAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..0*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Practitioner.name.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 48. Practitioner.name.use
          Definition

          Identifies the purpose for this name.

          Shortusual | official | temp | nickname | anonymous | old | maiden
          Comments

          Applications can assume that a name is current unless it explicitly says that it is temporary or old.

          Control10..1
          BindingThe codes SHALL be taken from NameUsehttp://hl7.org/fhir/ValueSet/name-use|4.0.1
          (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

          The use of a human name.

          Typecode
          Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Allows the appropriate name for a particular context of use to be selected from among a set of names.

          Pattern Valueofficial
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          50. Practitioner.name.text
          Definition

          Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

          ShortText representation of the full name
          Comments

          Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

          Control10..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          A renderable, unencoded form.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          52. Practitioner.name.family
          Definition

          The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

          ShortFamily name (often called 'Surname')
          Comments

          Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

          Control0..01
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Alternate Namessurname
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          54. Practitioner.name.given
          Definition

          Given name.

          ShortGiven names (not always 'first'). Includes middle names
          Comments

          If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

          Control0..0*
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Alternate Namesfirst name, middle name
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          56. Practitioner.name.prefix
          Definition

          Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

          ShortParts that come before the name
          Control0..0*
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          58. Practitioner.name.suffix
          Definition

          Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

          ShortParts that come after the name
          Control0..0*
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          60. Practitioner.name.period
          Definition

          Indicates the period of time when this name was valid for the named person.

          ShortTime period when name was/is in use
          Control0..01
          TypePeriod
          Is Modifierfalse
          Summarytrue
          Requirements

          Allows names to be placed in historical context.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          62. Practitioner.telecom
          Definition

          A contact detail for the practitioner, e.g. a telephone number or an email address.

          ShortA contact detail for the practitioner (that apply to all roles)
          Comments

          Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and to help with identification. These typically will have home numbers, or mobile numbers that are not role specific.

          Control10..*
          TypeContactPoint
          Is Modifierfalse
          Summarytrue
          Requirements

          Need to know how to reach a practitioner independent to any roles the practitioner may have.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          NumeroTelefoneValido: Máscara de telefone para números nacionais (xx) xxxx-xxxx ou (xx) xxxxx-xxxx. Para números internacionais, o + significa que será utilizado o código do país, a lógica é de 1 a 3 dígitos de código do país (+X, +XX ou +XXX), na sequência uma quantidade de dígitos entre o código de área e o número propriamente dito que, somados ao código do país, não podem exceder 15 dígitos. ($this.where(system = 'phone').select(value).all(matches('^((\\(([0-9]{2})\\)) ([0-9]{4,5})\\-([0-9]{4}))|^((\\+\\d{1,3}) (\\d{2,3})) \\d{3,5}\\-\\d{4}$')))
          EmailValido: Máscara de email xxx@xxx.xx ($this.where(system = 'email').select(value).all(matches('^([\\w-\\.]+){1,64}@([\\w&&[^_]]+){2,255}(.[a-z]{2,}){1,}$')))
          SlicingThis element introduces a set of slices on Practitioner.telecom. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
          • pattern @ system
          • 64. Practitioner.telecom:phone
            Slice Namephone
            Definition

            A contact detail for the practitioner, e.g. a telephone number or an email address.

            ShortA contact detail for the practitioner (that apply to all roles)
            Comments

            Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and to help with identification. These typically will have home numbers, or mobile numbers that are not role specific.

            Control0..*
            TypeContactPoint
            Is Modifierfalse
            Summarytrue
            Requirements

            Need to know how to reach a practitioner independent to any roles the practitioner may have.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            66. Practitioner.telecom:phone.extension
            Definition

            An Extension


            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortExtensionAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..0*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Practitioner.telecom.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 68. Practitioner.telecom:phone.system
              Definition

              Telecommunications form for contact point - what communications system is required to make use of the contact.

              Shortphone | fax | email | pager | url | sms | other
              Control10..1
              This element is affected by the following invariants: cpt-2
              BindingThe codes SHALL be taken from ContactPointSystemhttp://hl7.org/fhir/ValueSet/contact-point-system|4.0.1
              (required to http://hl7.org/fhir/ValueSet/contact-point-system|4.0.1)

              Telecommunications form for contact point.

              Typecode
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Pattern Valuephone
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              70. Practitioner.telecom:phone.value
              Definition

              The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

              ShortThe actual contact point details
              Comments

              Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

              Control10..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              Need to support legacy numbers that are not in a tightly controlled format.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              72. Practitioner.telecom:phone.use
              Definition

              Identifies the purpose for the contact point.

              Shorthome | work | temp | old | mobile - purpose of this contact point
              Comments

              Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

              Control0..01
              BindingThe codes SHALL be taken from ContactPointUsehttp://hl7.org/fhir/ValueSet/contact-point-use|4.0.1
              (required to http://hl7.org/fhir/ValueSet/contact-point-use|4.0.1)

              Use of contact point.

              Typecode
              Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              74. Practitioner.telecom:phone.rank
              Definition

              Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

              ShortSpecify preferred order of use (1 = highest)
              Comments

              Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

              Control0..01
              TypepositiveInt
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              76. Practitioner.telecom:phone.period
              Definition

              Time period when the contact point was/is in use.

              ShortTime period when the contact point was/is in use
              Control0..01
              TypePeriod
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              78. Practitioner.telecom:email
              Slice Nameemail
              Definition

              A contact detail for the practitioner, e.g. a telephone number or an email address.

              ShortA contact detail for the practitioner (that apply to all roles)
              Comments

              Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and to help with identification. These typically will have home numbers, or mobile numbers that are not role specific.

              Control0..*
              TypeContactPoint
              Is Modifierfalse
              Summarytrue
              Requirements

              Need to know how to reach a practitioner independent to any roles the practitioner may have.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              80. Practitioner.telecom:email.extension
              Definition

              An Extension


              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortExtensionAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..0*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Practitioner.telecom.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 82. Practitioner.telecom:email.system
                Definition

                Telecommunications form for contact point - what communications system is required to make use of the contact.

                Shortphone | fax | email | pager | url | sms | other
                Control10..1
                This element is affected by the following invariants: cpt-2
                BindingThe codes SHALL be taken from ContactPointSystemhttp://hl7.org/fhir/ValueSet/contact-point-system|4.0.1
                (required to http://hl7.org/fhir/ValueSet/contact-point-system|4.0.1)

                Telecommunications form for contact point.

                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Pattern Valueemail
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                84. Practitioner.telecom:email.value
                Definition

                The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

                ShortThe actual contact point details
                Comments

                Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

                Control10..1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                Need to support legacy numbers that are not in a tightly controlled format.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                86. Practitioner.telecom:email.use
                Definition

                Identifies the purpose for the contact point.

                Shorthome | work | temp | old | mobile - purpose of this contact point
                Comments

                Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

                Control0..01
                BindingThe codes SHALL be taken from ContactPointUsehttp://hl7.org/fhir/ValueSet/contact-point-use|4.0.1
                (required to http://hl7.org/fhir/ValueSet/contact-point-use|4.0.1)

                Use of contact point.

                Typecode
                Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                88. Practitioner.telecom:email.rank
                Definition

                Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

                ShortSpecify preferred order of use (1 = highest)
                Comments

                Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

                Control0..01
                TypepositiveInt
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                90. Practitioner.telecom:email.period
                Definition

                Time period when the contact point was/is in use.

                ShortTime period when the contact point was/is in use
                Control0..01
                TypePeriod
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                92. Practitioner.gender
                Definition

                Administrative Gender - the gender that the person is considered to have for administration and record keeping purposes.

                Shortmale | female | other | unknown
                Control10..1
                BindingThe codes SHALL be taken from AdministrativeGenderhttp://hl7.org/fhir/ValueSet/administrative-gender|4.0.1
                (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

                The gender of a person used for administrative purposes.

                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                Needed to address the person correctly.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                94. Practitioner.birthDate
                Definition

                The date of birth for the practitioner.

                ShortThe date on which the practitioner was born
                Control10..1
                Typedate
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                Needed for identification.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                DataComPrecisaoDeDia: Data deve ter a precisão de dia ($this.toString().length() = 10)

                Guidance on how to interpret the contents of this table can be found here

                0. Practitioner
                ShortDados do Profissional de Saúde
                2. Practitioner.identifier
                NoteThis is a business identifier, not a resource identifier (see discussion)
                Control1..2
                SlicingThis element introduces a set of slices on Practitioner.identifier. The slices areOrdered and Closed, and can be differentiated using the following discriminators:
                • pattern @ system
                • 4. Practitioner.identifier.value
                  Control1..?
                  6. Practitioner.identifier:cpf
                  Slice Namecpf
                  NoteThis is a business identifier, not a resource identifier (see discussion)
                  Control0..1
                  8. Practitioner.identifier:cpf.extension
                  Control0..0
                  10. Practitioner.identifier:cpf.use
                  Control0..0
                  12. Practitioner.identifier:cpf.type
                  Control0..0
                  14. Practitioner.identifier:cpf.system
                  Control1..?
                  Pattern Valuehttps://fhir.saude.go.gov.br/sid/cpf
                  16. Practitioner.identifier:cpf.value
                  Control1..?
                  18. Practitioner.identifier:cpf.period
                  Control0..0
                  20. Practitioner.identifier:cpf.assigner
                  Control0..0
                  22. Practitioner.identifier:cns
                  Slice Namecns
                  NoteThis is a business identifier, not a resource identifier (see discussion)
                  Control0..1
                  24. Practitioner.identifier:cns.extension
                  Control0..0
                  26. Practitioner.identifier:cns.use
                  Control0..0
                  28. Practitioner.identifier:cns.type
                  Control0..0
                  30. Practitioner.identifier:cns.system
                  Control1..?
                  Pattern Valuehttps://fhir.saude.go.gov.br/sid/cns
                  32. Practitioner.identifier:cns.value
                  Control1..?
                  34. Practitioner.identifier:cns.period
                  Control0..0
                  36. Practitioner.identifier:cns.assigner
                  Control0..0
                  38. Practitioner.name
                  Control1..?
                  InvariantsRN04: O text deve possuir pelo menos dois nomes separados por espaço. (text.split(' ').count() > 1)
                  40. Practitioner.name.extension
                  Control0..0
                  42. Practitioner.name.use
                  Control1..?
                  Pattern Valueofficial
                  44. Practitioner.name.text
                  Control1..?
                  46. Practitioner.name.family
                  Control0..0
                  48. Practitioner.name.given
                  Control0..0
                  50. Practitioner.name.prefix
                  Control0..0
                  52. Practitioner.name.suffix
                  Control0..0
                  54. Practitioner.name.period
                  Control0..0
                  56. Practitioner.telecom
                  Control1..?
                  InvariantsNumeroTelefoneValido: Máscara de telefone para números nacionais (xx) xxxx-xxxx ou (xx) xxxxx-xxxx. Para números internacionais, o + significa que será utilizado o código do país, a lógica é de 1 a 3 dígitos de código do país (+X, +XX ou +XXX), na sequência uma quantidade de dígitos entre o código de área e o número propriamente dito que, somados ao código do país, não podem exceder 15 dígitos. ($this.where(system = 'phone').select(value).all(matches('^((\\(([0-9]{2})\\)) ([0-9]{4,5})\\-([0-9]{4}))|^((\\+\\d{1,3}) (\\d{2,3})) \\d{3,5}\\-\\d{4}$')))
                  EmailValido: Máscara de email xxx@xxx.xx ($this.where(system = 'email').select(value).all(matches('^([\\w-\\.]+){1,64}@([\\w&&[^_]]+){2,255}(.[a-z]{2,}){1,}$')))
                  SlicingThis element introduces a set of slices on Practitioner.telecom. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
                  • pattern @ system
                  • 58. Practitioner.telecom:phone
                    Slice Namephone
                    Control0..*
                    60. Practitioner.telecom:phone.extension
                    Control0..0
                    62. Practitioner.telecom:phone.system
                    Control1..?
                    Pattern Valuephone
                    64. Practitioner.telecom:phone.value
                    Control1..?
                    66. Practitioner.telecom:phone.use
                    Control0..0
                    68. Practitioner.telecom:phone.rank
                    Control0..0
                    70. Practitioner.telecom:phone.period
                    Control0..0
                    72. Practitioner.telecom:email
                    Slice Nameemail
                    Control0..*
                    74. Practitioner.telecom:email.extension
                    Control0..0
                    76. Practitioner.telecom:email.system
                    Control1..?
                    Pattern Valueemail
                    78. Practitioner.telecom:email.value
                    Control1..?
                    80. Practitioner.telecom:email.use
                    Control0..0
                    82. Practitioner.telecom:email.rank
                    Control0..0
                    84. Practitioner.telecom:email.period
                    Control0..0
                    86. Practitioner.gender
                    Control1..?
                    88. Practitioner.birthDate
                    Control1..?
                    InvariantsDataComPrecisaoDeDia: Data deve ter a precisão de dia ($this.toString().length() = 10)

                    Guidance on how to interpret the contents of this table can be found here

                    0. Practitioner
                    Definition

                    A person who is directly or indirectly involved in the provisioning of healthcare.

                    ShortDados do Profissional de Saúde
                    Control0..*
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
                    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
                    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
                    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
                    dom-6: A resource should have narrative for robust management (text.`div`.exists())
                    2. Practitioner.id
                    Definition

                    The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

                    ShortLogical id of this artifact
                    Comments

                    The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

                    Control0..1
                    Typeid
                    Is Modifierfalse
                    Summarytrue
                    4. Practitioner.meta
                    Definition

                    The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

                    ShortMetadata about the resource
                    Control0..1
                    TypeMeta
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    6. Practitioner.implicitRules
                    Definition

                    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                    ShortA set of rules under which this content was created
                    Comments

                    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

                    Control0..1
                    Typeuri
                    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    8. Practitioner.language
                    Definition

                    The base language in which the resource is written.

                    ShortLanguage of the resource content
                    Comments

                    Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                    Control0..1
                    BindingThe codes SHOULD be taken from CommonLanguages
                    (preferred to http://hl7.org/fhir/ValueSet/languages)

                    A human language.

                    Additional BindingsPurpose
                    AllLanguagesMax Binding
                    Typecode
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    10. Practitioner.text
                    Definition

                    A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

                    ShortText summary of the resource, for human interpretation
                    Comments

                    Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                    Control0..1
                    TypeNarrative
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesnarrative, html, xhtml, display
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    12. Practitioner.contained
                    Definition

                    These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

                    ShortContained, inline Resources
                    Comments

                    This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

                    Control0..*
                    TypeResource
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesinline resources, anonymous resources, contained resources
                    14. Practitioner.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    16. Practitioner.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                    Summaryfalse
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    18. Practitioner.identifier
                    Definition

                    An identifier that applies to this person in this role.

                    ShortAn identifier for the person as this agent
                    NoteThis is a business identifier, not a resource identifier (see discussion)
                    Control1..2
                    TypeIdentifier
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    Often, specific identities are assigned for the agent.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    SlicingThis element introduces a set of slices on Practitioner.identifier. The slices areOrdered and Closed, and can be differentiated using the following discriminators:
                    • pattern @ system
                    • 20. Practitioner.identifier.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      22. Practitioner.identifier.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Practitioner.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 24. Practitioner.identifier.use
                        Definition

                        The purpose of this identifier.

                        Shortusual | official | temp | secondary | old (If known)
                        Comments

                        Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                        Control0..1
                        BindingThe codes SHALL be taken from IdentifierUse
                        (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                        Identifies the purpose for this identifier, if known .

                        Typecode
                        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Requirements

                        Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        26. Practitioner.identifier.type
                        Definition

                        A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                        ShortDescription of identifier
                        Comments

                        This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                        Control0..1
                        BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                        (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                        A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                        TypeCodeableConcept
                        Is Modifierfalse
                        Summarytrue
                        Requirements

                        Allows users to make use of identifiers when the identifier system is not known.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        28. Practitioner.identifier.system
                        Definition

                        Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                        ShortThe namespace for the identifier value
                        Comments

                        Identifier.system is always case sensitive.

                        Control0..1
                        Typeuri
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Requirements

                        There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                        Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        30. Practitioner.identifier.value
                        Definition

                        The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                        ShortThe value that is unique
                        Comments

                        If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                        Control1..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Example<br/><b>General</b>:123456
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        32. Practitioner.identifier.period
                        Definition

                        Time period during which identifier is/was valid for use.

                        ShortTime period when id is/was valid for use
                        Control0..1
                        TypePeriod
                        Is Modifierfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        34. Practitioner.identifier.assigner
                        Definition

                        Organization that issued/manages the identifier.

                        ShortOrganization that issued id (may be just text)
                        Comments

                        The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                        Control0..1
                        TypeReference(Organization)
                        Is Modifierfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        36. Practitioner.identifier:cpf
                        Slice Namecpf
                        Definition

                        An identifier that applies to this person in this role.

                        ShortAn identifier for the person as this agent
                        NoteThis is a business identifier, not a resource identifier (see discussion)
                        Control0..1
                        TypeIdentifier
                        Is Modifierfalse
                        Summarytrue
                        Requirements

                        Often, specific identities are assigned for the agent.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        38. Practitioner.identifier:cpf.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        40. Practitioner.identifier:cpf.extension
                        Definition

                        An Extension

                        ShortExtension
                        Control0..0
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        SlicingThis element introduces a set of slices on Practitioner.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ url
                        • 42. Practitioner.identifier:cpf.use
                          Definition

                          The purpose of this identifier.

                          Shortusual | official | temp | secondary | old (If known)
                          Comments

                          Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                          Control0..0
                          BindingThe codes SHALL be taken from IdentifierUse
                          (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                          Identifies the purpose for this identifier, if known .

                          Typecode
                          Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Requirements

                          Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          44. Practitioner.identifier:cpf.type
                          Definition

                          A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                          ShortDescription of identifier
                          Comments

                          This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                          Control0..0
                          BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                          (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                          A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                          TypeCodeableConcept
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          Allows users to make use of identifiers when the identifier system is not known.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          46. Practitioner.identifier:cpf.system
                          Definition

                          Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                          ShortThe namespace for the identifier value
                          Comments

                          Identifier.system is always case sensitive.

                          Control1..1
                          Typeuri
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Requirements

                          There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                          Pattern Valuehttps://fhir.saude.go.gov.br/sid/cpf
                          Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          48. Practitioner.identifier:cpf.value
                          Definition

                          The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                          ShortThe value that is unique
                          Comments

                          If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                          Control1..1
                          Typestring
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Example<br/><b>General</b>:123456
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          50. Practitioner.identifier:cpf.period
                          Definition

                          Time period during which identifier is/was valid for use.

                          ShortTime period when id is/was valid for use
                          Control0..0
                          TypePeriod
                          Is Modifierfalse
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          52. Practitioner.identifier:cpf.assigner
                          Definition

                          Organization that issued/manages the identifier.

                          ShortOrganization that issued id (may be just text)
                          Comments

                          The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                          Control0..0
                          TypeReference(Organization)
                          Is Modifierfalse
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          54. Practitioner.identifier:cns
                          Slice Namecns
                          Definition

                          An identifier that applies to this person in this role.

                          ShortAn identifier for the person as this agent
                          NoteThis is a business identifier, not a resource identifier (see discussion)
                          Control0..1
                          TypeIdentifier
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          Often, specific identities are assigned for the agent.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          56. Practitioner.identifier:cns.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          58. Practitioner.identifier:cns.extension
                          Definition

                          An Extension

                          ShortExtension
                          Control0..0
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          SlicingThis element introduces a set of slices on Practitioner.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 60. Practitioner.identifier:cns.use
                            Definition

                            The purpose of this identifier.

                            Shortusual | official | temp | secondary | old (If known)
                            Comments

                            Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                            Control0..0
                            BindingThe codes SHALL be taken from IdentifierUse
                            (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                            Identifies the purpose for this identifier, if known .

                            Typecode
                            Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            62. Practitioner.identifier:cns.type
                            Definition

                            A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                            ShortDescription of identifier
                            Comments

                            This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                            Control0..0
                            BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                            (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                            A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Summarytrue
                            Requirements

                            Allows users to make use of identifiers when the identifier system is not known.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            64. Practitioner.identifier:cns.system
                            Definition

                            Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                            ShortThe namespace for the identifier value
                            Comments

                            Identifier.system is always case sensitive.

                            Control1..1
                            Typeuri
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                            Pattern Valuehttps://fhir.saude.go.gov.br/sid/cns
                            Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            66. Practitioner.identifier:cns.value
                            Definition

                            The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                            ShortThe value that is unique
                            Comments

                            If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                            Control1..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Example<br/><b>General</b>:123456
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            68. Practitioner.identifier:cns.period
                            Definition

                            Time period during which identifier is/was valid for use.

                            ShortTime period when id is/was valid for use
                            Control0..0
                            TypePeriod
                            Is Modifierfalse
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            70. Practitioner.identifier:cns.assigner
                            Definition

                            Organization that issued/manages the identifier.

                            ShortOrganization that issued id (may be just text)
                            Comments

                            The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                            Control0..0
                            TypeReference(Organization)
                            Is Modifierfalse
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            72. Practitioner.active
                            Definition

                            Whether this practitioner's record is in active use.

                            ShortWhether this practitioner's record is in active use
                            Comments

                            If the practitioner is not in use by one organization, then it should mark the period on the PractitonerRole with an end date (even if they are active) as they may be active in another role.

                            Control0..1
                            Typeboolean
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            Need to be able to mark a practitioner record as not to be used because it was created in error.

                            Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            74. Practitioner.name
                            Definition

                            The name(s) associated with the practitioner.

                            ShortThe name(s) associated with the practitioner
                            Comments

                            The selection of the use property should ensure that there is a single usual name specified, and others use the nickname (alias), old, or other values as appropriate.

                            In general, select the value to be used in the ResourceReference.display based on this:

                            1. There is more than 1 name
                            2. Use = usual
                            3. Period is current to the date of the usage
                            4. Use = official
                            5. Other order as decided by internal business rules.
                            Control1..*
                            TypeHumanName
                            Is Modifierfalse
                            Summarytrue
                            Requirements

                            The name(s) that a Practitioner is known by. Where there are multiple, the name that the practitioner is usually known as should be used in the display.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            RN04: O text deve possuir pelo menos dois nomes separados por espaço. (text.split(' ').count() > 1)
                            76. Practitioner.name.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            78. Practitioner.name.extension
                            Definition

                            An Extension

                            ShortExtension
                            Control0..0
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            SlicingThis element introduces a set of slices on Practitioner.name.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                            • value @ url
                            • 80. Practitioner.name.use
                              Definition

                              Identifies the purpose for this name.

                              Shortusual | official | temp | nickname | anonymous | old | maiden
                              Comments

                              Applications can assume that a name is current unless it explicitly says that it is temporary or old.

                              Control1..1
                              BindingThe codes SHALL be taken from NameUse
                              (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

                              The use of a human name.

                              Typecode
                              Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              Allows the appropriate name for a particular context of use to be selected from among a set of names.

                              Pattern Valueofficial
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              82. Practitioner.name.text
                              Definition

                              Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

                              ShortText representation of the full name
                              Comments

                              Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

                              Control1..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              A renderable, unencoded form.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              84. Practitioner.name.family
                              Definition

                              The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

                              ShortFamily name (often called 'Surname')
                              Comments

                              Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

                              Control0..0
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Alternate Namessurname
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              86. Practitioner.name.given
                              Definition

                              Given name.

                              ShortGiven names (not always 'first'). Includes middle names
                              Comments

                              If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

                              Control0..0
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Alternate Namesfirst name, middle name
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              88. Practitioner.name.prefix
                              Definition

                              Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

                              ShortParts that come before the name
                              Control0..0
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              90. Practitioner.name.suffix
                              Definition

                              Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

                              ShortParts that come after the name
                              Control0..0
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              92. Practitioner.name.period
                              Definition

                              Indicates the period of time when this name was valid for the named person.

                              ShortTime period when name was/is in use
                              Control0..0
                              TypePeriod
                              Is Modifierfalse
                              Summarytrue
                              Requirements

                              Allows names to be placed in historical context.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              94. Practitioner.telecom
                              Definition

                              A contact detail for the practitioner, e.g. a telephone number or an email address.

                              ShortA contact detail for the practitioner (that apply to all roles)
                              Comments

                              Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and to help with identification. These typically will have home numbers, or mobile numbers that are not role specific.

                              Control1..*
                              TypeContactPoint
                              Is Modifierfalse
                              Summarytrue
                              Requirements

                              Need to know how to reach a practitioner independent to any roles the practitioner may have.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              NumeroTelefoneValido: Máscara de telefone para números nacionais (xx) xxxx-xxxx ou (xx) xxxxx-xxxx. Para números internacionais, o + significa que será utilizado o código do país, a lógica é de 1 a 3 dígitos de código do país (+X, +XX ou +XXX), na sequência uma quantidade de dígitos entre o código de área e o número propriamente dito que, somados ao código do país, não podem exceder 15 dígitos. ($this.where(system = 'phone').select(value).all(matches('^((\\(([0-9]{2})\\)) ([0-9]{4,5})\\-([0-9]{4}))|^((\\+\\d{1,3}) (\\d{2,3})) \\d{3,5}\\-\\d{4}$')))
                              EmailValido: Máscara de email xxx@xxx.xx ($this.where(system = 'email').select(value).all(matches('^([\\w-\\.]+){1,64}@([\\w&&[^_]]+){2,255}(.[a-z]{2,}){1,}$')))
                              SlicingThis element introduces a set of slices on Practitioner.telecom. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
                              • pattern @ system
                              • 96. Practitioner.telecom:phone
                                Slice Namephone
                                Definition

                                A contact detail for the practitioner, e.g. a telephone number or an email address.

                                ShortA contact detail for the practitioner (that apply to all roles)
                                Comments

                                Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and to help with identification. These typically will have home numbers, or mobile numbers that are not role specific.

                                Control0..*
                                TypeContactPoint
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                Need to know how to reach a practitioner independent to any roles the practitioner may have.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                98. Practitioner.telecom:phone.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                100. Practitioner.telecom:phone.extension
                                Definition

                                An Extension

                                ShortExtension
                                Control0..0
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                SlicingThis element introduces a set of slices on Practitioner.telecom.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                • value @ url
                                • 102. Practitioner.telecom:phone.system
                                  Definition

                                  Telecommunications form for contact point - what communications system is required to make use of the contact.

                                  Shortphone | fax | email | pager | url | sms | other
                                  Control1..1
                                  This element is affected by the following invariants: cpt-2
                                  BindingThe codes SHALL be taken from ContactPointSystem
                                  (required to http://hl7.org/fhir/ValueSet/contact-point-system|4.0.1)

                                  Telecommunications form for contact point.

                                  Typecode
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Pattern Valuephone
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  104. Practitioner.telecom:phone.value
                                  Definition

                                  The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

                                  ShortThe actual contact point details
                                  Comments

                                  Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

                                  Control1..1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Requirements

                                  Need to support legacy numbers that are not in a tightly controlled format.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  106. Practitioner.telecom:phone.use
                                  Definition

                                  Identifies the purpose for the contact point.

                                  Shorthome | work | temp | old | mobile - purpose of this contact point
                                  Comments

                                  Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

                                  Control0..0
                                  BindingThe codes SHALL be taken from ContactPointUse
                                  (required to http://hl7.org/fhir/ValueSet/contact-point-use|4.0.1)

                                  Use of contact point.

                                  Typecode
                                  Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Requirements

                                  Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  108. Practitioner.telecom:phone.rank
                                  Definition

                                  Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

                                  ShortSpecify preferred order of use (1 = highest)
                                  Comments

                                  Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

                                  Control0..0
                                  TypepositiveInt
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  110. Practitioner.telecom:phone.period
                                  Definition

                                  Time period when the contact point was/is in use.

                                  ShortTime period when the contact point was/is in use
                                  Control0..0
                                  TypePeriod
                                  Is Modifierfalse
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  112. Practitioner.telecom:email
                                  Slice Nameemail
                                  Definition

                                  A contact detail for the practitioner, e.g. a telephone number or an email address.

                                  ShortA contact detail for the practitioner (that apply to all roles)
                                  Comments

                                  Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and to help with identification. These typically will have home numbers, or mobile numbers that are not role specific.

                                  Control0..*
                                  TypeContactPoint
                                  Is Modifierfalse
                                  Summarytrue
                                  Requirements

                                  Need to know how to reach a practitioner independent to any roles the practitioner may have.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  114. Practitioner.telecom:email.id
                                  Definition

                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                  ShortUnique id for inter-element referencing
                                  Control0..1
                                  Typestring
                                  Is Modifierfalse
                                  XML FormatIn the XML format, this property is represented as an attribute.
                                  Summaryfalse
                                  116. Practitioner.telecom:email.extension
                                  Definition

                                  An Extension

                                  ShortExtension
                                  Control0..0
                                  TypeExtension
                                  Is Modifierfalse
                                  Summaryfalse
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  SlicingThis element introduces a set of slices on Practitioner.telecom.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                  • value @ url
                                  • 118. Practitioner.telecom:email.system
                                    Definition

                                    Telecommunications form for contact point - what communications system is required to make use of the contact.

                                    Shortphone | fax | email | pager | url | sms | other
                                    Control1..1
                                    This element is affected by the following invariants: cpt-2
                                    BindingThe codes SHALL be taken from ContactPointSystem
                                    (required to http://hl7.org/fhir/ValueSet/contact-point-system|4.0.1)

                                    Telecommunications form for contact point.

                                    Typecode
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Pattern Valueemail
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    120. Practitioner.telecom:email.value
                                    Definition

                                    The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

                                    ShortThe actual contact point details
                                    Comments

                                    Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

                                    Control1..1
                                    Typestring
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Requirements

                                    Need to support legacy numbers that are not in a tightly controlled format.

                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    122. Practitioner.telecom:email.use
                                    Definition

                                    Identifies the purpose for the contact point.

                                    Shorthome | work | temp | old | mobile - purpose of this contact point
                                    Comments

                                    Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

                                    Control0..0
                                    BindingThe codes SHALL be taken from ContactPointUse
                                    (required to http://hl7.org/fhir/ValueSet/contact-point-use|4.0.1)

                                    Use of contact point.

                                    Typecode
                                    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Requirements

                                    Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    124. Practitioner.telecom:email.rank
                                    Definition

                                    Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

                                    ShortSpecify preferred order of use (1 = highest)
                                    Comments

                                    Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

                                    Control0..0
                                    TypepositiveInt
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    126. Practitioner.telecom:email.period
                                    Definition

                                    Time period when the contact point was/is in use.

                                    ShortTime period when the contact point was/is in use
                                    Control0..0
                                    TypePeriod
                                    Is Modifierfalse
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    128. Practitioner.address
                                    Definition

                                    Address(es) of the practitioner that are not role specific (typically home address). Work addresses are not typically entered in this property as they are usually role dependent.

                                    ShortAddress(es) of the practitioner that are not role specific (typically home address)
                                    Comments

                                    The PractitionerRole does not have an address value on it, as it is expected that the location property be used for this purpose (which has an address).

                                    Control0..*
                                    TypeAddress
                                    Is Modifierfalse
                                    Summarytrue
                                    Requirements

                                    The home/mailing address of the practitioner is often required for employee administration purposes, and also for some rostering services where the start point (practitioners home) can be used in calculations.

                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    130. Practitioner.gender
                                    Definition

                                    Administrative Gender - the gender that the person is considered to have for administration and record keeping purposes.

                                    Shortmale | female | other | unknown
                                    Control1..1
                                    BindingThe codes SHALL be taken from AdministrativeGender
                                    (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

                                    The gender of a person used for administrative purposes.

                                    Typecode
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Requirements

                                    Needed to address the person correctly.

                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    132. Practitioner.birthDate
                                    Definition

                                    The date of birth for the practitioner.

                                    ShortThe date on which the practitioner was born
                                    Control1..1
                                    Typedate
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Requirements

                                    Needed for identification.

                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    DataComPrecisaoDeDia: Data deve ter a precisão de dia ($this.toString().length() = 10)
                                    134. Practitioner.photo
                                    Definition

                                    Image of the person.

                                    ShortImage of the person
                                    Control0..*
                                    TypeAttachment
                                    Is Modifierfalse
                                    Summaryfalse
                                    Requirements

                                    Many EHR systems have the capability to capture an image of patients and personnel. Fits with newer social media usage too.

                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    136. Practitioner.qualification
                                    Definition

                                    The official certifications, training, and licenses that authorize or otherwise pertain to the provision of care by the practitioner. For example, a medical license issued by a medical board authorizing the practitioner to practice medicine within a certian locality.

                                    ShortCertification, licenses, or training pertaining to the provision of care
                                    Control0..*
                                    TypeBackboneElement
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    138. Practitioner.qualification.id
                                    Definition

                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                    ShortUnique id for inter-element referencing
                                    Control0..1
                                    Typestring
                                    Is Modifierfalse
                                    XML FormatIn the XML format, this property is represented as an attribute.
                                    Summaryfalse
                                    140. Practitioner.qualification.extension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                    ShortAdditional content defined by implementations
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifierfalse
                                    Summaryfalse
                                    Alternate Namesextensions, user content
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    142. Practitioner.qualification.modifierExtension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                    ShortExtensions that cannot be ignored even if unrecognized
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                    Summarytrue
                                    Requirements

                                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                    Alternate Namesextensions, user content, modifiers
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    144. Practitioner.qualification.identifier
                                    Definition

                                    An identifier that applies to this person's qualification in this role.

                                    ShortAn identifier for this qualification for the practitioner
                                    NoteThis is a business identifier, not a resource identifier (see discussion)
                                    Control0..*
                                    TypeIdentifier
                                    Is Modifierfalse
                                    Summaryfalse
                                    Requirements

                                    Often, specific identities are assigned for the qualification.

                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    146. Practitioner.qualification.code
                                    Definition

                                    Coded representation of the qualification.

                                    ShortCoded representation of the qualification
                                    Control1..1
                                    BindingFor example codes, see v2 table 0360, Version 2.7
                                    (example to http://terminology.hl7.org/ValueSet/v2-2.7-0360)

                                    Specific qualification the practitioner has to provide a service.

                                    TypeCodeableConcept
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    148. Practitioner.qualification.period
                                    Definition

                                    Period during which the qualification is valid.

                                    ShortPeriod during which the qualification is valid
                                    Control0..1
                                    TypePeriod
                                    Is Modifierfalse
                                    Summaryfalse
                                    Requirements

                                    Qualifications are often for a limited period of time, and can be revoked.

                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    150. Practitioner.qualification.issuer
                                    Definition

                                    Organization that regulates and issues the qualification.

                                    ShortOrganization that regulates and issues the qualification
                                    Control0..1
                                    TypeReference(Organization)
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    152. Practitioner.communication
                                    Definition

                                    A language the practitioner can use in patient communication.

                                    ShortA language the practitioner can use in patient communication
                                    Comments

                                    The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

                                    Control0..*
                                    BindingThe codes SHOULD be taken from CommonLanguages
                                    (preferred to http://hl7.org/fhir/ValueSet/languages)

                                    A human language.

                                    Additional BindingsPurpose
                                    AllLanguagesMax Binding
                                    TypeCodeableConcept
                                    Is Modifierfalse
                                    Summaryfalse
                                    Requirements

                                    Knowing which language a practitioner speaks can help in facilitating communication with patients.

                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))